Application Introduction:

This product is a full spectrum high color cob device

The product reduces the damage to the retina, the color of the object seen by the human eye is true (referring to the typical sunlight D40 spectrum, the parts of purple, cyan, green and red light in the visible light band are supplemented), and it is more comfortable than the ordinary light source when reading (because the human eye has a high sensitivity to the red light, while in the full spectrum light source, the spectral composition of the red light is close to D40), and the special color spot process control technology is adopted, The color of the light source is more pure on the basis of high color rendering index and full spectrum. It can more truly show the real primary color of the object.

20w 30w High Efficiency 6500K 80CRI Cool White COB Leds

Quick details:

Product specification:

Package Structure

Absolute Maximum Ratings

Typical Electro-Optical characteristics curves:

Typical Characteristics Curves

Packaging:

INSTRUCTION MANUAL

Storage

Before opening the package,the product should be kept at ＋5 ºC ~ ＋30ºC or less and humidity less than 60%RH,LED should be used within 168 Hrs.of opening the package.Please make sure to dehumidify and vacuum pack the remining unused LED

Assembly

Set soldering iron temperature at 350℃and soldering time not More than 5 seconds,Please make sure when soldering ,there is no external force on the soldering surface and silicon batardeau (such as pressure or sharp metal nails ,etc),to avoid gold wire deformation or damage and other abnormalities.

During assembli,plesse ensure that a good quality thermal paste is applied and distributed evenly over the surface.

Static Electricity

Static electricity or surge voltage damages the LEDs. Damaged LEDs will show some unusual characteristic such as the forward voltage becomes lower, or the LEDs do not light at the low current. even not light.

All devices, equipment and machinery must be properly grounded. At the same time, it is recommended that

wrist bands or anti-electrostatic gloves, anti-electrostatic containers be used when dealing with the LEDs.

Vulcanization

LED curing is due to sulfur being in bracket and the +1 price of silver in the chemical reaction generated Ag2S in the process. It will lead to the capacity of reflecting of silver layer reducing , light color temperature drift and serious decline ,seriously affecting the performance of the product. So we should take corresponding measures to avioding vulcanization, such as to avoid using sulphur volatile substances and keeping away from high sulphur content of the material.

Safety Advice For Human Eyes

Viewing direct to the light emitting center of the LEDs, especially those of great Luminous Intensity will cause great hazard to human eyes. Please be careful.

Before shipments, the color difference of white LED in every BIN is confirmed .When produce LED pipe products, please do not fuse different BIN together before color-difference-confirming.

Product features:

1.LED using the high quality encapsulation material with
copper stent , Doublink 99.99% gold wire , Taiwan and American chip brand (Epistar ,Epileds , Bridgelux),Dow corning resin, Intematix phosphor
2. High reliable ,high lighting effect
3. Products supplies 100% full power.
4. Low heating generation to reduce electricity consumption
5. Great reducing carbon emission
6. Minimizing drastic climate change
7. Great reducing maintenance cost
8. Long lifespan
9. Instant start, no flashing
10.Low consumption, high brightness.

Phoenix (suzhou) Electronic Co., Ltd is a modern enterprise specializing in LED packaging production. Products are widely used in UV curing, sterilization, office lighting, commercial lighting, advertising lighting and other fields. The company was founded in 2008. After nearly ten years of precipitation and accumulation, our company is full of talents and vitality. There are more than 5000 square meters of workshops and supporting facilities, more than 60 new production lines, a large number of professional engineering and technical personnel, rich production experience and advanced production technology. They often analyze and customize products for customers, which can not only meet the special-shaped needs of customers, but also meet the needs of large-scale orders.